RFID LABELS AND TAGS

[ecardsone]

There are some essential factors that you should know before going to a UHF RFID tag manufacturer are size, orientation and reading angle, an area located, and the price tag.
Size: the chip size is a very important factor, for this reason, that the more the RFID tag antenna, has the better sensitivity and the tag detection. Either the tag response is always similar whenever it is detected, it can then develop reliable and robust tag applications. The reader antennas are made of aluminum or copper.
Location area: it is a very important factor to take into account where the applied tag is going so that the UHF RFID solution is effective and meets the necessary labels and tag reading ranges. There are reading labels and tags solutions for metal that allow you to place them on the metal and detect them correctly. The metal material and adhesive is used are determined by environmental factors like high-temperature, indoor, or outdoor. It is the case usually in pharmaceuticals tracking or some food tracking and also other special applications.
Orientation and reading angle: If you have circular reader antennas then you do not have to worry much about tag orientation. The tag orientation is irritating when you try to detect labels or tags with linear antennas. The tag reading range of these is lower by the antenna composition.
Price tag RFID: If your application needs a large volume of labels and tags, then according to the UHF RFID tag manufacturer, it is surely the most important factor to determine the product pricing and measure return on investment.

[Author]

Posts